Fermenting/Dripping
During this phase the Salami are intensely dried, with temperature that can range from 14 up to 70°C (“pepperoni” style products).TURBO SYSTEM
The system is made up of an air processing unit which is made up of:
- A refrigeration section, fed by direct expansion or glycol water
- A heating section fed by hot gas or hot water
- A ventilating section
While manufacturing the air circulation system particular care is taken to obtain uniform thermal-hygrometric conditions, in order to have the same processing for the whole product stored. The plant is controlled and managed by a programmable microprocessor regulating all the various equipment and allowing to store and reproduce perfect drying cycles.
The instrument can be connected with a pH continuous measurement system allowing to control product acidification and data recording to execute pH trend curves and tables. As a result, the product standard can be repeated independent of the different kinds of meat, environmental conditions and/or variable loads of the room.
Furthermore, it can be connected with the heart probes to measure the product temperature and with the loading rooms allowing to record any change of loss in weight.
BIFLUSSO SYSTEM
Biflusso® is a Frigomeccanica’s patented system that thanks to an innovative air distribution system permit to switch the air flow inside the room from the top to the bottom and conversely and from the right to the left and conversely. Biflusso® permit to reach the best the thermo-hygrometric homogeneity inside the room.
It’s especially useful in rooms in which the product load reach the 5-6 meters high, with a room high of 7-8 meters.
Those facts involve:
- Uniform results also with high density load.
- Possibility to increase squared meter load up to three times the load is possible with only one load layer. This bring to a lower surface required to produce the same product amount.
The plant can be manufactured in two versions according to the customer's needs:
- With equipped walls where the canalisation is replaced by the technical spaces created inside prefabricated panels;
- With a stainless or zinc-coated steel canalisation with separate circuits for the delivery and taking of the down/up and up/down phase.
The various stages of the aging process are controlled by a programmable microprocessor which ensures the implementation of cycles tailored to the characteristics of the product.
